top of page

Global Plasma Solution

GPS Product 1.png

GPS-FC-3-BAS™

  • The GPS-FC-3-BAS™ unit is designed to be mounted inside of fan coils, heat pumps, PTACs, ductless mini-splits and air handlers up to 3,200 CFM or 8 tons. It's compact size and simple mounting requirement allows it to be mounted almost anywhere in just a few minutes.

GPS Product 2.png

GPS-FC48-AC™

  • An automatic self-cleaning, lightweight NPBI system that handles up to 4,800 CFM or 12 tons. Designed for multiple mounting options including fan inlet, interior duct walls or floors.

GPS Product 3.png

GPS-DM48-AC™

  • The world's first automatic self-cleaning, duct mounted, lightweight NPBI electronic air cleaner. The maintenance free unit is designed for indoor or outdoor duct mounting and can handle up to 4,800 CFM or 12 tons.

GPS Product 4.png

GPS-FC24-AC™/S™

  • An automatic self-cleaning, lightweight NPBI system that handles up to 2,400 CFM or 6 tons. Designed for multiple mounting options including fan inlet, interior duct walls or floors.

GPS Product 5.png

GPS-iRIB® 18/36

  • The GPS-iRIB is available in 18" and 36" lengths. They are made from a flexible chemical, heat and cold resistant Kapton® material containing a circuit with special carbon fiber ion emitters soldered into the circuit traces. This mechanism is engineered to deliver the highest level of ionization with the least amount of energy in the most compact size. Designed for 3200 CFM or 8 tons.

GPS Product 6.png

GPS-iMOD®

  • The GPS-iMOD is a modular NPBI system that is field assembled to any length up to 240 inches in 6-inch increments. The fiberglass composite carbon fiber GPS-iMOD can be mounted in various environments. It can treat 50-250 CFM per inch of bar, depending on the application.

GPS Product 7.png

GPS-iMEASURE™

  • The GPS-iMEASURE is the first commercially available ion detector that can be permanently mounted in the space to measure ion levels in real time and report back to BAS.

GPS Product 8.png

GPS-iMEASURE-D™

  • The GPS-iMEASURE-D ion detector is permanently mounted in the duct downstream of any GPS ionization device. It measures ion levels in real time and reports back to a BAS. It includes three sensitivity levels: 20,000/200,000/2,000,000 ions/cc/sec that can be set based on the application and in-duct location

bottom of page